Göm meny

Engine Estimation




Book chapters

2012
[Höckerdal et al., 2012]
Read the abstract of the paperExternal PDFShow BibTeX entry
Off- and On-Line Identification of Maps Applied to the Gas Path in Diesel Engines.
Erik Höckerdal, Lars Eriksson, and Erik Frisk (2012).
Volume 418 of Identification for Automotive Systems, In Lecture Notes in Control and Information Sciences. Editors: D. Alberer, H. Hjalmarsson and L. del Re.. pp. 241--256. Springer Verlag.


Journal Papers

2014
[Thomasson and Eriksson, 2014]
Read the abstract of the paperExternal PDFShow BibTeX entry
Co-Surge in Bi-Turbo Engines - Measurements, Analysis and Control.
Andreas Thomasson, and Lars Eriksson (2014).
In: Control Engineering Practice, 32:113--122.
2013
[Leufvén and Eriksson, 2013]
Read the abstract of the paperExternal PDFShow BibTeX entry
A Surge and Choke Capable Compressor Flow Model - Validation and Extrapolation Capability.
Oskar Leufvén, and Lars Eriksson (2013).
In: Control Engineering Practice, 21(12):1871--1883.
[Guardiola et al., 2013]
Read the abstract of the paperExternal PDFShow BibTeX entry
A computationally efficient Kalman filter based estimator for updating look-up tables applied to NOx estimation in diesel engines.
Carlos Guardiola, Benjamin Pla, David Blanco-Rodriguez, and Lars Eriksson (2013).
In: Control Engineering Practice, 21(11):1455--1468.
[Thomasson et al., 2013]
Read the abstract of the paperExternal PDFShow BibTeX entry
Modeling and validation of a boost pressure actuation system for a series sequentially turbocharged SI engine.
Andreas Thomasson, Oskar Leufvén, Ivan Criscuolo, and Lars Eriksson (2013).
In: Control Engineering Practice, 21:1860--1870.
[Wahlström and Eriksson, 2013]
Read the abstract of the paperExternal PDFShow BibTeX entry
Output Selection and Its Implications for MPC of EGR and VGT in Diesel Engines.
Johan Wahlström, and Lars Eriksson (2013).
In: IEEE Transactions on Control Systems Technology, 21(3):932--940.
2012
[Leufven and Eriksson, 2012]
Read the abstract of the paperExternal PDFShow BibTeX entry
Investigation of Compressor Correction Quantities for Automotive Applications.
Oskar Leufven, and Lars Eriksson (2012).
In: International Journal of Engine Research, 13(6):588--606.
2011
[Höckerdal et al., 2011]
Read the abstract of the paperExternal PDFShow BibTeX entry
EKF-based Adaptation of Look-Up Tables with an Air Mass-Flow Sensor Application.
Erik Höckerdal, Erik Frisk, and Lars Eriksson (2011).
In: Control Engineering Practice, 19(5):442--453.
2009
[Andersson and Eriksson, 2009]
Read the abstract of the paperExternal PDFShow BibTeX entry
A Parametric Model for Ionization Current in a Four Stroke SI Engine.
Ingemar Andersson, and Lars Eriksson (2009).
In: ASME Journal of Dynamic Systems, Measurement, and Control, 113(2):11 pages.
[Höckerdal et al., 2009]
Read the abstract of the paperExternal PDFShow BibTeX entry
Observer Design and Model Augmentation for Bias Compensation With a Truck Engine Application.
Erik Höckerdal, Erik Frisk, and Lars Eriksson (2009).
In: Control Engineering Practice, 17(3):408--417.
2006
[Klein et al., 2006]
Read the abstract of the paperExternal PDFShow BibTeX entry
Compression Ratio Estimation based on Cylinder Pressure Data.
Marcus Klein, Lars Eriksson, and Jan Åslund (2006).
In: Control Engineering Practice, 14(3):197--211.
2005
[Eriksson, 2005]
Read the abstract of the paperExternal PDFShow BibTeX entry
CHEPP -- A Chemical Equilibrium Program Package for Matlab.
Lars Eriksson (2005).
In: SAE Transactions, Journal of Fuels and Lubricants, 2004-01-1460, 4(113):730--741.
[Klein and Eriksson, 2005]
Read the abstract of the paperExternal PDFShow BibTeX entry
A specific heat ratio model for single-zone heat release models.
Marcus Klein, and Lars Eriksson (2005).
In: SAE 2004 Transactions Journal of Engines, 2004-01-1464, .
2003
[Eriksson and Nielsen, 2003]
Read the abstract of the paperExternal PDFShow BibTeX entry
Towards On-Board Engine Calibration with Feedback Control Incorporating Combustion Models and Ion-sense.
Lars Eriksson, and Lars Nielsen (2003).
In: at -- Automatisierungstechnik, 51(5):204--212.
[Klein et al., 2003]
Read the abstract of the paperExternal PDFShow BibTeX entry
Compression Estimation from Simulated and Measured Cylinder Pressure.
Marcus Klein, Lars Eriksson, and Ylva Nilsson (2003).
In: SAE 2002 Transactions Journal of Engines, 2002-01-0843, 111(3).
[Eriksson, 2003]
Read the abstract of the paperExternal PDFShow BibTeX entry
Mean Value Models for Exhaust System Temperatures.
Lars Eriksson (2003).
In: SAE 2002 Transactions, Journal of Engines, 2002-01-0374, 111(3).
1998
[Nielsen and Eriksson, 1998]
Read the abstract of the paperExternal PDFShow BibTeX entry
An Ion-Sense Engine-Fine-Tuner.
Lars Nielsen, and Lars Eriksson (1998).
In: IEEE Control Systems, 18(5):43--52.
[Eriksson, 1998]
Read the abstract of the paperExternal PDFShow BibTeX entry
Requirements for and a Systematic Method for Identifying Heat-Release Model Parameters.
Lars Eriksson (1998).
In: SAE Transactions, Journal of Engines, 107:898--908. SAE Techincal Paper Number 980626.
[Eriksson et al., 1998]
Read the abstract of the paperExternal PDFShow BibTeX entry
Closed Loop Ignition Control by Ionization Current Interpretation.
Lars Eriksson, Lars Nielsen, and Mikael Glavenius (1998).
In: SAE Transactions, Journal of Engines, 106(SAE Technical Paper 970854):1216--1223.
1997
[Eriksson and Nielsen, 1997]
Read the abstract of the paperExternal PDFShow BibTeX entry
Ionization Current Interpretation for Ignition Control in Internal Combustion Engines.
Lars Eriksson, and Lars Nielsen (1997).
In: Control Engineering Practice, 5(8):1107--1113.
[Eriksson et al., 1997]
Read the abstract of the paperExternal PDFShow BibTeX entry
Ignition Control by Ionization Current Interpretation.
Lars Eriksson, Lars Nielsen, and Jan Nytomt (1997).
In: SAE Transactions, Journal of Engines, 105(SAE Technical Paper 960045):165--171.


Conference Papers

2011
[Höckerdal et al., 2011]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Bias Reduction in DAE Estimators by Model Augmentation: Observability Analysis and Experimental Evaluation.
Erik Höckerdal, Erik Frisk, and Lars Eriksson (2011).
In: 50th IEEE Conference on Decision and Control. Orlando, Florida, USA.
[Criscuolo et al., 2011]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Model-based boost pressure control with system voltage disturbance rejection.
Ivan Criscuolo, Oskar Leufven, Andreas Thomasson, and Lars Eriksson (2011).
In: IFAC World Congress. Milano, Italy.
[Leufven and Eriksson, 2011]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Surge and Choke Capable Compressor Model.
Oskar Leufven, and Lars Eriksson (2011).
In: IFAC World Congress. Milano, Italy.
2010
[Höckerdal et al., 2010]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Model Based Engine Map Adaptation Using EKF.
Erik Höckerdal, Erik Frisk, and Lars Eriksson (2010).
In: 6th IFAC Symposium on Advances in Automotive Control. Munich, Germany.
2008
[Höckerdal et al., 2008]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Observer Design and Model Augmentation for Bias Compensation Applied to an Engine.
Erik Höckerdal, Erik Frisk, and Lars Eriksson (2008).
IFAC World Congress. Seoul, Korea.
2006
[Klein and Eriksson, 2006]
Read the abstract of the paperExternal PDFShow BibTeX entry
Methods for Cylinder Pressure Based Compression Ratio Estimation.
Marcus Klein, and Lars Eriksson (2006).
In: Electronic Engine Control. Volume 2006-01-0185 of SAE Technical paper series SP-2003. SAE World Congress, Detroit, USA.
2005
[Klein and Eriksson, 2005]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Utilizing Cylinder Pressure Data for Compression Ratio Estimation.
Marcus Klein, and Lars Eriksson (2005).
IFAC World Congress. Prague, Czech Republic.
[Andersson and Eriksson, 2005]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Observer Based Feedforward Air-Fuel Control of Turbocharged SI-Engines.
Per Andersson, and Lars Eriksson (2005).
IFAC World Congress. Prague, Czech Republic.
[Andersson et al., 2005]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Sensor Selection for Observer Feedback in Turbocharged Spark Ignited Engines.
Per Andersson, Erik Frisk, and Lars Eriksson (2005).
IFAC World Congress. Prague, Czech Republic.
[Nilsson and Frisk, 2005]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Detecting Knock in Spark Ignited Engines.
Ylva Nilsson, and Erik Frisk (2005).
IFAC World Congress. Prague, Czech Republic.
2004
[Klein et al., 2004]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Compression ratio estimation based on cylinder pressure data.
Marcus Klein, Lars Eriksson, and Jan Åslund (2004).
IFAC Symposium on Advances in Automotive Control. Salerno, Italy, pp. 314--319.
[Klein and Eriksson, 2004]
Read the abstract of the paperExternal PDFShow BibTeX entry
A specific heat ratio model for single-zone heat release models.
Marcus Klein, and Lars Eriksson (2004).
In: Modeling of SI Engines. Volume 2004-01-1464 of SAE Technical paper series SP-1830.
[Klein and Eriksson, 2004]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
A comparison of specific heat ratio models for cylinder pressure modeling.
Marcus Klein, and Lars Eriksson (2004).
CCSSE. Norrköping, Sweden.
[Andersson and Eriksson, 2004]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Mean-value Observer for a Turbocharged SI-engine.
Per Andersson, and Lars Eriksson (2004).
IFAC Symposium on Advances in Automotive Control. Salerno, Italy, pp. 146--151.
[Andersson and Eriksson, 2004]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Cylinder Air Charge Estimator in Turbocharged SI-Engines.
Per Andersson, and Lars Eriksson (2004).
In: Electronic Engine Contols. Volume 2004-01-1366 of SAE Technical paper series SP-1822.
[Nilsson and Eriksson, 2004]
Read the abstract of the paperExternal PDFShow BibTeX entry
Determining TDC Position using Symmetry and other Methods.
Ylva Nilsson, and Lars Eriksson (2004).
In: Modeling of Spark Ignition Engines. Volume 2004-01-1458 of SAE Technical paper series SP-1830.
2002
[Klein and Eriksson, 2002]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Models, methods and performance when estimating the compression ratio based on the cylinder pressure.
Marcus Klein, and Lars Eriksson (2002).
CCSSE. Norrköping, Sweden.
[Eriksson et al., 2002]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Control and Optimization of Turbo Charged Spark Ignited Engines.
Lars Eriksson, Simon Frei, Christopher Onder, and Lino Guzzella (2002).
IFAC World Congress. Barcelona, Spain.
[Eriksson, 2002]
Read the abstract of the paperExternal PDFShow BibTeX entry
Mean Value Models for Exhaust System Temperatures.
Lars Eriksson (2002).
In: Modeling of SI engines. Volume SAE Technical Paper 2002-01-0374 of SP-1702.
[Klein et al., 2002]
Read the abstract of the paperExternal PDFShow BibTeX entry
Compression Estimation from Simulated and Measured Cylinder Pressure.
Marcus Klein, Lars Eriksson, and Ylva Nilsson (2002).
In: Electronic Engine Controls. Volume SAE Technical Paper 2002-01-0843 of SP-1704.
2001
[Andersson and Eriksson, 2001]
Read the abstract of the paperDownload Article (pdf-file)External PDFShow BibTeX entry
Air-to-Cylinder Observer on a Turbocharged SI-Engine with Wastegate.
Per Andersson, and Lars Eriksson (2001).
In: Electronic Engine Controls. Volume SP-1585SAE Technical Paper 2001-01-0262. pp. 33--40. SAE 2001 World Congress, March 2001, Detroit, MI, USA.
[Andersson, 2001]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Comparison of two Exhaust Manifold Pressure Estimation Methods.
Per Andersson (2001).
CCSSE. Norrköping, Sweden, pp. 287--295.
2000
[Andersson and Eriksson, 2000]
Read the abstract of the paperExternal PDFShow BibTeX entry
Ion Sensing for Combustion Stability Control of a Spark Ignited Direct Injected Engine.
Ingemar Andersson, and Lars Eriksson (2000).
In: Electronic Engine Controls: Controls. Volume SP-1500SAE Technical Paper 2000-01-0552. SAE 2000 World Congress, March 2000, Detroit, MI, USA.
1999
[Andersson and Eriksson, 1999]
Show BibTeX entry
Ion Current Interpretation for Sensing and Control of Combustion Stability.
Ingemar Andersson, and Lars Eriksson (1999).
In: Second conference on Computer Science and Systems Engineering in Linköping. pp. 119--124.
1998
[Eriksson, 1998]
Read the abstract of the paperExternal PDFShow BibTeX entry
Requirements for and a Systematic Method for Identifying Heat-Release Model Parameters.
Lars Eriksson (1998).
In: Modeling of SI and Diesel Engines. Volume SP-1330SAE Technical Paper no. 980626. pp. 19--30.
1997
[Eriksson et al., 1997]
Read the abstract of the paperExternal PDFShow BibTeX entry
Closed Loop Ignition Control by Ionization Current Interpretation.
Lars Eriksson, Lars Nielsen, and Mikael Glavenius (1997).
In: Electronic Engine Controls. Volume SP-1236SAE Technical Paper 970854. pp. 159--166. SAE International Congress and Exposition, Detroit, MI, USA.
1996
[Nielsen and Eriksson, 1996]
Read the abstract of the paperShow BibTeX entry
Ionization Current Interpretation for Ignition Control in Internal Combustion Engines.
Lars Nielsen, and Lars Eriksson (1996).
Volume Q. pp. 117--122.


Doctoral Theses

2011
[Höckerdal, 2011]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Model Error Compensation in ODE and DAE Estimators with Automotive Engine Applications.
Erik Höckerdal (2011).
PhD thesis, No. 1366, Linköping University.


Licentiate Theses

2008
[Höckerdal, 2008]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Observer Design and Model Augmentation for Bias Compensation with Engine Applications.
Erik Höckerdal (2008).
Lic thesis, Linköping University. LiU-TEK-LIC-2008:48, Thesis No. 1390.
2004
[Klein, 2004]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
A specific heat ratio model and compression ratio estimation.
Marcus Klein (2004).
Lic thesis, Linköpings Universitet. LiU-TEK-LIC-2004:33, Thesis No. 1104.
2002
[Andersson, 2002]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Intake Air Dynamics on a Turbocharged SI-Engine with Wastegate.
Per Andersson (2002).
Lic thesis, Linköpings Universitet. LiU-TEK-LIC-2002:07, Thesis No. 934.
1997
[Eriksson, 1997]
Read the abstract of the paperShow BibTeX entry
Closed-Loop Spark-Advance Control using the Spark Plug as Ion Probe.
Lars Eriksson (1997).
Lic thesis, Linköpings Universitet. LiU-TEK-LIC-1997:14, Thesis No. 613.


Master's Theses

2014
[Höglund, 2014]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Knock Detection in a Two-Stroke Engine to be Used in the Engine Management System.
Filip Höglund (2014).
Masters thesis, LiTH-ISY-EX--14/4744--SE, Linköpings universitet, SE-581 83 Linköping.
2013
[Boström, 2013]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
On Estimation of Momentary Average Engine Speed and Acceleration.
Per Boström (2013).
Masters thesis, LiTH-ISY-EX--13/4667--SE, Linköpings universitet, SE-581 83 Linköping.
2012
[Carlsson, 2012]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Modeling and Experimental Validation of a Rankine Cycle Based Exhaust WHR System for Heavy Duty Appliations.
Carin Carlsson (2012).
Masters thesis, LiTH-ISY-EX--12/4595--SE, Linköping University, SE-581 83 Linköping.
[Ingeström and Hansson, 2012]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
A Method for Estimating Soot Load in a DPF Using an RF-based Sensor.
Victor Ingeström, and John Hansson (2012).
Masters thesis, LiTH-ISY-EX--12/4584--SE, Linköping University, SE-581 83 Linköping.
2011
[Berggren and Melin, 2011]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
UKF and EKF with time dependent measurement and model uncertainties for state estimation in heavy duty diesel engines.
Henrik Berggren, and Martin Melin (2011).
Masters thesis, LiTH-ISY-EX--11/4484--SE, Linköping University, SE-581 83 Linköping.
2009
[Ainouz and Vedholm, 2009]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Mean Value Model of the Gas Temperature at the Exhaust Valve.
Filip Ainouz, and Jonas Vedholm (2009).
Masters thesis, LiTH-ISY-EX-09/4296--SE, Linköping University, SE-581 83 Linköping.
[Bergström and Höckerdal, 2009]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Model Based Diagnosis of the Intake Manifold Pressure on a Diesel Engine.
Christoffer Bergström, and Gunnar Höckerdal (2009).
Masters thesis, LiTH-ISY-EX-09/4290--SE, Linköping University, SE-581 83 Linköping.
2006
[Falkeborn, 2006]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Evaluation of Differential Algebraic Elimination Methods for Deriving Consistency Relations from an Engine Model.
Rikard Falkeborn (2006).
Masters thesis, LiTH-ISY-EX-06/3899--SE, Linköpings Universitet, SE-581 83 Linköping.
[Hansen and Molin, 2006]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Design and Evaluation of an Automatically Generated Diagnosis System.
Joakim Hansen, and Jens Molin (2006).
Masters thesis, LiTH-ISY-EX-06/3889--SE, Linköpings Universitet, SE-581 83 Linköping.
[Svärd and Wassén, 2006]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Development of Methods for Automatic Design of Residual Generators.
Carl Svärd, and Henrik Wassén (2006).
Masters thesis, LiTH-ISY-EX-06/3888--SE, Linköpings Universitet, SE-581 83 Linköping.
[Wikström, 2006]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Yaw Rate and Lateral Acceleration Sensor Plausibilisation in an Active Front Steering Vehicle.
Anders Wikström (2006).
Masters thesis, LiTH-ISY-EX-06/3818--SE, Linköpings Universitet, SE-581 83 Linköping.
[Jerhammar and Höckerdal, 2006]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Gas flow observer for a Scania diesel engine with VGT and EGR.
Andreas Jerhammar, and Erik Höckerdal (2006).
Masters thesis, LiTH-ISY-EX-06/3807--SE, Linköpings Universitet, SE-581 83 Linköping.
[Blom, 2006]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Analys av precision vid fällning av ostyrda vapen från JAS39 Gripen.
Lina Blom (2006).
Masters thesis, LiTH-ISY-EX-06/3802--SE, Linköpings Universitet, SE-581 83 Linköping.
[Bengtsson, 2006]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Estimation of Indicated and Load Torque from Engine Speed Variations.
Fredrik Bengtsson (2006).
Masters thesis, LiTH-ISY-EX-06/3793--SE, Linköpings Universitet, SE-581 83 Linköping.
2005
[Johansson and Waller, 2005]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Control Oriented Modeling of the Dynamics in a Catalytic Converter.
Jenny Johansson, and Mikaela Waller (2005).
Masters thesis, LiTH-ISY-EX-3707-2005, Linköpings Universitet, SE-581 83 Linköping.
2004
[Mellblom, 2004]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Start Modelling for heavy trucks.
Fredrik Mellblom (2004).
Masters thesis, LiTH-ISY-EX-3560-2004, Linköpings Universitet, SE-581 83 Linköping.
2003
[Sinnerstad, 2003]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Knock Intensity and Torque Conrol on an SVC Engine.
Klara Sinnerstad (2003).
Masters thesis, LiTH-ISY-EX-3497-2003, Linköpings Universitet, SE-581 83 Linköping.
[Ivansson, 2003]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Estimation of the Residual Gas Fraction in an HCCI-engine using Cylinder Pressure.
Niklas Ivansson (2003).
Masters thesis, LiTH-ISY-EX-3441-2003, Linköpings Universitet, SE-581 83 Linköping.
[Karlsson, 2003]
Show BibTeX entry
Development of a Time-Variant Discrete Observer for Cylinder Head Temperature Estimation.
Niclas Karlsson (2003).
Masters thesis, LiTH-ISY-EX-3403-2003, Linköpings Universitet, SE-581 83 Linköping.
2002
[Bergstedt, 2002]
Show BibTeX entry
A sliding Mode Observer for a nonlinear temperature estimation in a cylinderhead of a diesel engine.
Erika Bergstedt (2002).
Masters thesis, LiTH-ISY-EX-3255-2002, Linköpings Universitet, SE-581 83 Linköping.
2001
[Hallor, 2001]
Show BibTeX entry
Observer for a Fuel Injection Valve with a Piezoelectric Stack Actuator.
Mattias Hallor (2001).
Masters thesis, LiTH-ISY-EX-3220, Linköpings Universitet, SE-581 83 Linköping.
[Öberg, 2001]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Identification and Improvements of an Automotive Diesel Engine Model purposed for Model Based Diagnosis.
Sven Öberg (2001).
Masters thesis, LiTH-ISY-EX-3161, Linköpings Universitet, SE-581 83 Linköping.
2000
[Bruce, 2000]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Estimation of the EGR rate in a GDI engine working in stratified mode using the ionization current.
Mattias Bruce (2000).
Masters thesis, LiTH-ISY-EX-3083, Linköpings Universitet, SE-581 83 Linköping.
[Järgenstedt, 2000]
Read the abstract of the paperDownload Article (pdf-file)Show BibTeX entry
Detecting Start of Combustion using Knock Sensor Signals.
Mats Järgenstedt (2000).
Masters thesis, LiTH-ISY-EX-3035, Linköpings Universitet, SE-581 83 Linköping.
1995
[Eriksson, 1995]
Download Article (pdf-file)Show BibTeX entry
Methods for Ionization Current Interpretation to be Used in Ignition Control.
Lars Eriksson (1995).
Masters thesis, LiTH-ISY-EX-1507, Linköpings Universitet, S-581 83 Linköping.
[Mosskull, 1995]
Show BibTeX entry
Nonlinear-observers for SI engine models.
Åsa Mosskull (1995).
Masters thesis, LiTH-ISY-EX-1505, Linköpings Universitet, S-581 83 Linköping.


Informationsansvarig: webmaster
Senast uppdaterad: 2014-09-26